SMT Reel Holder and Storage [mgrl]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== SMT Reel Holder and Storage ======

{{:maschine:pickandplace:reelholder.png?800|simple smt reel holder and storage mounted to machine (render)}}

  * 3d printed
  * for 7" reels only
  * no overhead per reel
  * short clips to keep the reel in position (three clips per reel)
  * long clips with some surface to stick a label on
  * only three 8/10/12mm shafts of desired length needed
  * mount to machine to refill stripe feeder directly (four to six M3 screws)
  * mount to machine to feed the 0816 automatic feeder
  * use standalone to store reels, just put it onto your desk

===== Download CAD-Files =====
Download all files for 8mm, 10mm and 12mm shafts in one bundle: {{ :maschine:pickandplace:feeder:reelholder_8_10_12mm-shaft.zip|}}. It contains a .step-file and stl-files for direct printing.

{{:maschine:pickandplace:feeder:reelholder_standalone.jpg|}}